CM LEVER PULLERS
Printable PDF
Lever Pullers are highly versatile tools that can be used to pull, lift, drag or stretch.
All CM Lever Pullers use hardened alloy steel chain for long life and forged steel
swivel hooks with latches for safety and ease of use.
 |
CM PULLER
Designed for heavy-duty construction
and industrial applications. Fully
enclosed lift wheel resists dirt and
grit that can damage mechanism.
• Tough Aluminum alloy construction.
• Lifetime warranty against defects
in workmanship and materials.
• Weatherproof
• Made in U.S.A.
• Low turning ratio results in
quick chain movement |
SERIES 653
Designed for close quarter, standard
duty commercial applications. Short
handle with low pull requirement
makes these units easy to operate.
• Impact resistant, stamped steel frame, gear case and cover for durability
and light weight.
• Hardened steel, redundant load
sharing gears.
• Double pawl arrangement for
optimum load control.
• Two chain guide rollers for precise chain fit.
• 5 year warranty.
• Rubber handle grip for added operator
comfort.
• Minimal maintenance with no special tools required. |
 |
|
OPTIONAL OVERLOAD DEVICES FOR THE CM PULLERS
Two ways to protect your loads and lever pullers from overload damage are available as optional accessories to your CM PULLERS. Either device may be installed on your PULLER at time of order or ordered separately as a kit for simple installation on models already in use. |
| Part No. |
Std. Lengths (ft.) |
Max. Cap. (tons) |
Lever Pull(lbs.) |
Min. HookDistance(in.) |
Lever Length(in.) |
Hook Throat Opening(in.) |
5 Ft. NetWt(lbs.) |
| CM Puller |
|
|
|
|
|
|
| 34P |
5, 10, 20 |
3/4 |
58 |
10 3/4 |
21 1/4 |
1 1/32 |
16 |
| 112P |
5, 10, 20 |
1 1/2 |
89 |
14 1/4 |
21 1/4 |
1 1/8 |
26 |
| 3P |
5, 10, 20 |
3 |
95 |
17 |
21 1/4 |
1 7/32 |
38 |
| 6P |
5 |
6 |
96 |
21 3/8 |
21 1/4 |
1 3/4 |
73 |
| Series 653 |
|
|
|
|
|
|
| 34PI |
5, 10, 15, 20 |
3/4 |
33 |
12 6/8 |
11 |
1 1/8 |
15 |
| 112PI |
5, 10, 15, 20 |
1 1/2 |
51 |
14 13/16 |
16 1/4 |
1 1/4 |
27 |
| 3PI |
5, 10 |
3 |
77 |
18 11/16 |
16 1/4 |
1 9/16 |
45 |
|
LOAD LIMITER
(Not available on Series 653)
Stops excessive lever force from being transmitted to the PULLER.
|
LOAD SENTRY
(Not available on Series 653)
Deflection of the handle grip warns the user when excessive force is being applied to the lever handle.
|
|
